The Brief Introduction Of Air Hose Coupling

December 07 15:42 2021

Couplings: Compressed air transfer, connecting pneumatic tools and pneumatic systems, water systems in the industry, at construction sites, agriculture and horticulture.

 

It departs American Type and European type both including hose end, male connector, female connector, the size from 1/4-2. For the big size of the hose end, female connector and male connector such as 11/4, 11/2 and 2 with crowfoot 4 lugs. The surface of American type is electric with white zinc, it’s Npt thread. For the European type is electric with yellow zinc, it’s bspt thread. All the product will make the 100% test before shipped.

According to many customer’s requirement we also open the new mould for blanked, triple connection.

About the double bolt hose clamps

When install in the pipe, two different size clamps can use same pipe. If you want to pipe tight, you can chose the small size. To the contrary, if you want to relex, then you can chose the big size. In actual use, the pipe should be inserted into the liner, and the outer diameter of the pipe will be increased, so that there will be no problem in use. The size from SL22-SL1275 we can produce, for the new mould now SL22-SL49 we don’t use the spacer, when intall on the pipe is more circle then the old mould. For the SL60-SL400 we use the carbon steel spacer, for the big size from SL525-SL1275 we use the malleable iron spacer. When used the product if you meet any problem welcome to contact with us freely to solve for you.

 

These are broadly used for air and water in industry and construction. They have two lugs (claws) each, which engage in the corresponding notches of the opposite half. That is why they can be connected so easily – just by pushing two part together and turning. Our factory have 30 years of production experience of hose fittings. Product quality is stable, test results are more than relevant national standards and feedback from customers are not bad. If you are interested, welcome enquiry. We assure you of our best services at all times.

1. European Type claw distance 42 mm, including Couplings, Air Hose Coupling, Universal Hose And Fittings, Quick Connect Hose Fittings.

2. Features:  Yellow zinc   BSPT threads, it working pressure 10 bar, with oil resistant NBR rubber seal

3. Material: Malleable iron

4. Size:  1/4’’—1’’ are two lugs; 1-1/4’’—2’’ are four lugs.

5. Application:  Compressed air transfer, connecting pneumatic tools and pneumatic systems, water systems in the industry, at construction sites, agriculture and horticulture.

Media Contact
Company Name: Shijiazhuang Donghuan Malleable Iron Castings CO., LTD
Email: Send Email
Phone: 86-0311-85301359
Country: China
Website: https://www.sdhcasting.com/